I predict that AC motors WILL become universal in cars and boats .AC controllers are now readilly available from industry .What we really need to make it easy is a controller than takes a low voltage DC in direct from your batteries and puts out a variable three phase Ac Line voltage to power an inexpensive standard rugged induction motor.Thats to say the missing link is a variable frequency low to high voltage inverter (VFD)
Chris S
--- In electricboats@
>
> Arby Bernt wrote:
> > Locomotives use AC drive systems due to the complexity of coupling the engine to the drive wheels. Before AC coupling was available, the slip between the drive wheels and the track was nearly impossible to control, as the friction of a non-slipping drive wheel can transmit more force than than a slipping wheel. By comparing the rotation of a drive wheel to a static wheel, the speed difference can be maintained at under 0.5%.
>
> Most of the world's railway 'diesel electrics' are DC motored. AC
> motors have only come in over the last 10 years and then only at the big
> end. Railways have been reluctant to switch from series DC motors.
> 'Switchers' would still mostly be series connected DC motors, AC
> traction motors are still working their way down the feeding chain.
>
> Even then they are not all induction motors - the French were big on
> Synchronous motors with slip rings for a while - I presume so they could
> control the current in the rotor coils.
>
> EMD apparently built their first AC motored locomotive in 1987, but the
> first big order wasn't till '93. The same source says at 2005 , 50% of
> the market was still DC motored, EMD's split was 60% AC, 40%DC.
>
> Sounds sort of like us electric boaters - those 'new fangled AC motors'
> are still not quite trusted yet :-)
>
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
No comments:
Post a Comment