To reduce the confusion, Mike's album is called "Bluenose 24. EV candidate?".
And David, if installing a drive well, I would recommend doing it well, not badly. ;)
Fair winds,
Eric
Marina del Rey, CA
--- In electricboats@yahoogroups.com, "pitremichael" <pitremichael@...> wrote:
>
> So there's no confusion, I posted some pictures in an album. The boat is fiberglass. I was thinking of using a v drive and putting the prop assembly just aft of the rudder, below the waterline. I have an stern locker that would fit a small motor beautfully.
>
> Can everyone see the pictures? Is it more clear what I'm thinking about?
>
> --- In electricboats@yahoogroups.com, "davidhughes_casaba" <davidhughes_casaba@> wrote:
> >
> > Mike,
> > You may need to post to 2 forums and I would suggest the wooden boat forum. With regard to the well that Eric described, I have seen it done both well and not so well (pun not intended). There is a lot going on structurally there and you want to be careful if you go down that road. Best to talk to a builder.
> >
No comments:
Post a Comment