photos posted in AmpEater by RandyB photo album
--- In electricboats@yahoogroups.com, "RandyB" <bartlettrandy@...> wrote:
>
> I did this project.
>
> You need a center-tap pot. I used a 10,000 ohms 2 watt, wire-wound linear potentiometers, Part number 5905-258-6808 manufactured by Clarostat.
>
> They aren't that common, but there's one listed on ebay as "New* 10K ohm Clarostat Potentiometer Center Tap".
>
> It goes from 0 to 5k in each direction.
>
> I started out with three cams made from large fender washers, epoxied onto the pot shaft. I'll try to post a pix.
__._,_.___
.
__,_._,___
No comments:
Post a Comment