Tim, the finish thickness is about 1/2 inch and if I remember correctly about 24 layers of 17 oz. cloth. Questions email me at inganear1@yahoo.com Dave K
From: tmalcolm <tim@xmfi.org>
To: electricboats@yahoogroups.com
Sent: Sat, January 29, 2011 7:40:01 PM
Subject: Re: [Electric Boats] mounting motor on glassed ply?
Hi Dave.
Very interesting site!
Quick question(s) - how many layers of cloth/mat? and how thick is the finished board?
Any help/advice would be appreciated. I have tons of general questions but will contact you directly after things are a bit more specific.
--Tim.
--- In electricboats@yahoogroups.com, Dave Kellogg <inganear1@...> wrote:
>
> Hi Tim,
>
> The site your referring to is mine, unfortunately I have had some difficulty
> with the Web provider causing it to be down at the moment. The Ply that you
> see in the photos is just a pattern, the actual board is solid layup of Epoxy
> and 17 oz. uni directional cloth with a mat backing. It was done under vacuum
> and is solid as a rock. The mounts to the hull are also solid layup, a little
> bit of an over kill but I wanted it that way so that's the way we built it...
> one of the reasons I used a solid layup of glass was to eliminate the salt
> water and salt air from the use of any aluminum and stainless fasteners, I also
> decided not to use any ply coring because of the crush factor and movement of
> the hull. Since my website is not up at the present time, if you have
> questions that may be answered by photos please let me know and I would be happy
> to connect with you off list...
>
> Dave K
> S/V Redeemed
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/electricboats/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/electricboats/join
(Yahoo! ID required)
<*> To change settings via email:
electricboats-digest@yahoogroups.com
electricboats-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
electricboats-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
__._,_.___
.
__,_._,___
No comments:
Post a Comment