I wouldn't use that one, it was an example of what to search for.
remember you are unique. Just like the rest of us.
From: Eric <ewdysar@yahoo.com>
To: electricboats@yahoogroups.com
Sent: Sunday, June 16, 2013 2:37 AM
Subject: [Electric Boats] Re: Minnkotas
Excellent solution, if you never plan on exceeding 96W (about 0.15hp) at full power.
Eric
Marina del Rey, CA
--- In electricboats@yahoogroups.com, "Kirk" <kirkmcloren@...> wrote:
>
>
>
> --- In electricboats@yahoogroups.com, R&M Mair <fullkeel2000@> wrote:
> >
> > I have seen info on here that the cheaper minnkota motors use resistors to control speed. Anyone notice significant run times between full speed and lower speeds?
> > Richard
> >
> http://www.amazon.com/LEDwholesalers-Dimming-Controller-LED-Lights/dp/B003L4KKF2/ref=pd_sim_hi_3
>
> this one is only for 12 volts but when you see how cheap it is using resistors is silly.
>
Eric
Marina del Rey, CA
--- In electricboats@yahoogroups.com, "Kirk" <kirkmcloren@...> wrote:
>
>
>
> --- In electricboats@yahoogroups.com, R&M Mair <fullkeel2000@> wrote:
> >
> > I have seen info on here that the cheaper minnkota motors use resistors to control speed. Anyone notice significant run times between full speed and lower speeds?
> > Richard
> >
> http://www.amazon.com/LEDwholesalers-Dimming-Controller-LED-Lights/dp/B003L4KKF2/ref=pd_sim_hi_3
>
> this one is only for 12 volts but when you see how cheap it is using resistors is silly.
>
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (6) |
.
__,_._,___
No comments:
Post a Comment