Very interesting and useful information, David.
I am finalizing my research for conversion of a 1954 30' wooden Phillip Rhodes which today has an 15hp outboard achieving up to 5.5 knts and spends 1 gal of gasoline per hour.
After a lot of reading and navigation on the web, my decision lies on 2 alternatives: the Sevcon Brushless Sailboat Kit http://www.thunderstruck-ev.com/index.php?dispatch=products.view&product_id=55 and the Solidnav Explorer http://www.solidnav.com/explorer.htm. Besides cost within more or less the same funtionality, simplicity of installation is one of my priorities. I was also considering a Gen4 controller for the Sevcon Kit. Now I found through you that a Kelly 48301 is also an alternative to consider and also found on their site a Mars 3001 Kit http://www.newkellycontroller.com/mars-3001-p-677.html which seems an even better solution from a cost stand point.
An issue that is not very clear to me is the need for a heat sink or similar hardware which is only mentioned on the Sevcon 250 amp Installation Manual. Does the Gen4 also need one? What about the other controllers.
Another thing I was recommended and am considering is the use of gear redcution. Since you mention it on your post, could you please send me the details? Having an outboard, currently my boat does not have all of the propeller parts, so any recommendation on this matter will be very much appreciated.
Thanks,
Carlos
--- In electricboats@yahoogroups.com, "Doug" <dj2210@...> wrote:
>
> David
> I just finished bench testing a Kelly 48301 with the Mars PMAC. I used four 12v 45ah UPS batteries. My PMAC is connected to a 2:1 gear reducer so really no load. With a tach on the gear reducer reading 1700 rpm the current from the batteries was about 12 amps. The Kelly was easy to set up and I got the throttle software option that allows one to use a pot centered to provide forward in one direction and reverse in the other. I also have tried the Sevcon gen4 and it also works good. The Sevcon is a sealed unit that IMO is more robust and better placed electrical connections.
> Doug
>
> --- In electricboats@yahoogroups.com, "goldsmithfoil" suntreader@ wrote:
> >
> > Group,
> >
> > I'm setting up a MARS PMAC and Kelly KBL controller package for my Islander 32 (about 10k pounds or so.) It'll run off a set of 6V cart batteries.
> >
> > A couple of questions. Has anyone used a Kelly controller? I had planned on a Sevcon originally but the Kelly seems like a nice unit (and its probably half the cost once everything is wired up and running.)
> >
> > Second question: How can I go about bench testing the whole deal before installation and before setting up the battery array. This conversion is part of a larger restoration project and it'll be six months before the boat heads to the water, I wanted to buy the batteries at the last moment so they don't just sit for that long. I can buy a small 48v power supply, but how much amperage is needed to test the system out? No need for full throttle, just turn on and spin the prop some.
> >
> > Looking for power supplies got me thinking. Could you set up something like this:
> >
> > http://www.trcelectronics.com/Meanwell/se-600-48.shtml
> >
> > First for testing and then installed to power the motor off of a Honda 2000 generator? There would be enough power to run the motor off the power supply and charge the batteries off a separate charger. That could give some redundancy in case there is a problem with the batteries or their charger, and I'd need the supply for running on the bench anyway.
> >
> > Thanks,
> > David
> >
>
No comments:
Post a Comment