If you switch from series to parallel for propulsion, you would not be able to able to use solar or wind for generation as you would be only charging one of the bank of batteries.
Unless you have a system of switching the charging from battery to battery(lowest charge first)
I am looking at having 2 banks and switching charging from one bank to the other and the bank not charging becomes my propulsion
from what I can figure using an NPN and a PNP FET in parallel should handle the switching easily
when the voltage on one bank drops below level set by zenner the opamp will switch to the other bank automatically and start the charging circuits.
my biggest issue is to prioritize the charging to be used saving the generator and shore power for last
only if the solar and wind are not producing enough to charge the batteries
and the dump load from the charge controller would actuate the brake on the wind gen
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (11) |
No comments:
Post a Comment