Mike, I don't believe prop pitch will do what you want, how much larger can you go with prop diameter...? Dave K
--- On Sun, 1/3/10, Mike <biankablog@verizon.net> wrote:
From: Mike <biankablog@verizon.net>
Subject: Re: [Electric Boats] Prop issue?
To: electricboats@yahoogroups.com
Date: Sunday, January 3, 2010, 6:30 PM
Hi Dave: Well I am not really worried about achieving regen though it would be nice. I too am more interested in low speed efficiency when motoring at say three to five knots. In the tests I've done so far I can use the Honda 2000 powering the Zivan NG-1 charger to move the boat about 2.8 knots in calm conditions without drawing any current from the battery bank. I'd like to see if I can get that over three and was wondering if changing the prop pitch might help. As I said I'm very happy now I was just wondering if some tweaking of the prop might improve things. Though I'm not sure how to figure what is the best prop size and pitch for my boat. Capt. Mike
From: Dave Kellogg <inganear1@yahoo.com>
Subject: Re: [Electric Boats] Prop issue?
To: electricboats@yahoogroups.com
Date: Sunday, January 3, 2010, 8:32 PM
Mike, it's not uncommon to re-stamp a new pitch number when refurbishing. As far as Regen capabilities, I don't believe the inch change in pitch will do anything and unless your prop efficiency and boat speed are 6+ knots your possibilities are pretty slim on Regen... I don't know your setup so it's hard to make any determination. . The more efficient you can make your prop you can better that speed by a couple of knots, but less than 3 knots you will not get anything... I'm still working on the lower speed efficiency Dave K
--- On Sun, 1/3/10, Mike <biankablog@verizon. net> wrote:
From: Mike <biankablog@verizon. net>
Subject: [Electric Boats] Prop issue?
To: "ELECTRIC BOATS" <electricboats@ yahoogroups. com>
Date: Sunday, January 3, 2010, 2:31 PM
| I originally spec'd out my 30 foot 8 ton sailboat with it's current 3 bladed prop. Which I thought from the documentation was a 16 inch diameter, right handed prop with a 14" pitch. When I was polishing the prop last spring I came across some of the stampings on the prop which lead me to believe I have something different than I thought. You can see the markings I uncovered in the second photo located here: It appears to me that the original 14" pitch was stamped over and 13 is stamped in it's place. I've been happy with the performance of the prop (except no regen) with my electric system but, I am wondering if I would get better performance with a 14" pitch as I thought I had. Can anyone shed some light on this issue and what I things I might want to change. As I said I have been happy with the performance as is but, I am wondering if I can make it better. Capt. Mike |
|
|
|
No comments:
Post a Comment