Hi Hannu.
If by "white bit" you're referring to the short spacers on the corners between the panel and the 90 degree stainless elbow, they're just 1 inch (inside diameter) PVC pieces that fit perfectly over the 1 inch (outside diameter) aluminum tube.
If you're referring to the way the bimini frame is attached to the solar panels, that was done with a 1 inch hole saw and some careful measuring and drilling through the panel frames. I did have to slightly enlarge one of the 8 holes that I drilled to get everything assembled.
BTW, I got rid of most of the previously mentioned slight sag with some shims between the lower lip of the frame and the transverse aluminum tube running above it.
I'll try to take and post some pics of the underside this weekend.
--Bob Moriarty
Ox 1976 C&C 33-1
Jax, FL
Posted by: moriartybob@yahoo.com
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (9) |
No comments:
Post a Comment