Friday, March 19, 2010

[Electric Boats] Re: Possible C27 conversion

 

I started out with an 11x10(I think)fixed two blade prop and at 20 amps I got 3 knots boat speed. Big difference with the three blade prop.

--- In electricboats@yahoogroups.com, "Doug" <dj2210@...> wrote:
>
> That's pretty impressive that you do 4 knots with only 20 amps. Your Ericson should be similiar to my Catalina 27 so I should expect similiar results with a comparible system.
>
> --- In electricboats@yahoogroups.com, "acsarfkram" <acsarfkram@> wrote:
> >
> > Hi Doug,
> >
> > Your Catalina 27 should be a good platform for an electric auxiliary.
> >
> > There are plenty of posts here regarding actual installed system performance, I'm not sure how you would search for them other than reading through a lot of messages.
> >
> > Here are my specifics;
> >
> > Installed May of '08
> > Ericson 27
> > SolidNav Explorer
> > Two 48 volt battery banks (4 group 27's and 4 group 31's both AGM)
> > 12x10 three blade fixed prop
> > Kipoint 48 volt charger, Pro Charging Systems Four Bank Pro
> > PakTrakr battery monitor
> > Various switches and cable
> >
> > At a draw of 20 amps I get 4 knots of boat speed. To date the longest I've motored was 7hrs at 20 amps and used only one of the banks.
> >
> > I also thought I would build a system myself but ended up buying a factory-built motor/controller/mount/reduction/throttle/forward-reverse switch unit. There was enough to do with running cable and mounting batteries to satisfy my tinkering needs.
> >
>

__._,_.___
.

__,_._,___

No comments:

Post a Comment