Been folloing this thread for a while, it's very informative but for the life of me I can't figure out what WOT is!!!!!
--- In electricboats@
>
> [Sorry if this is a dupe - groups keeps losing posts]
>
> I had a chance to test this today. ~15kt winds, 1' chop. I ran the boat downwind (no sails) at 40amps, got to 4.4kts. Turned 180 into the wind, and amp draw increased to 47amps, boatspeed dropped to 2.2kts. I ran in both directions long enough for a steady read.
>
> Similarly, I've seen amps drop when motorsailing and the wind comes up, but that's harder to measure (the ultimate form of that being [weak] regen)
>
>
> -Keith
>
> --- In electricboats@
> >
> > Keith,
> >
> > Slip does increase as the headwind (or any extra resistance increases) increases. Water is 'sorta' squishy ( not really compressible but flows 'sorts' easily) The 'sorta' is why amp draw goes up.
> >
> > With increases resistance the amps go up AND the boat slows down. The slowing down is why the amps go up - because the slip increases. The work the motor does is based on accelerating a mass of water backwards. The faster the boat is going forward, the less the prop can accelerate it backwards - hence less work, less amps.
> >
> > Next time you are out in your famous windy bay try WOT upwind and downwind and let us know the results. Up wind will be more.
> >
> > Denny
> >
> > ----- Original Message -----
> > From: aweekdaysailor
> > To: electricboats@
> > Sent: Tuesday, June 23, 2009 12:26 AM
> > Subject: [Electric Boats] Re: motor overheating
> >
> >
> >
> >
> >
> > Thanks Denny,
> >
> > So tied to the dock, slip is 100%. Pushing into a headwind - doesn't slip increase as well? Based on experience and intuition the boat just slows down - amps stays constant at a given throttle. You have to up throttle (voltage) to compensate and try to maintain speed.
> >
> > If we were talking golf carts again, I'd buy into the amps increasing. But water is squishy and will follow the path of least resistance - and given enough wind that would be sideways.
> >
> > But I'll do some homework to make sure I'm not just talking through my hat.
> >
> > -Keith
> >
> > (and I'm wondering if I've got a problem in my motor or ammeter - I can pull 20amps at WOT no load, belt removed)
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
No comments:
Post a Comment