Thanks for your reply, Dennis. It helps. I'm not trying to drive a Minn Kota motor with other props; I want to combine a Minn Kota 36-volt controller with an Etek or Mars-type 48 volt motor. Haven't decided on the prop yet, but the first one I have in mind is a three bladed 11 X 9. But your reply does gives me good information to work with. Sounds like I don't want to exceed the amp draw or I'll burn the controller. I'll look around to find out what the amp draw is for the Minn Kota 101 at 36 volts, and compare that to the same spec for the Etek or Mars motor. (I think they pull about 140 amps at 36 volts, but I have to recheck that spec, too.) I'll hit "send" on this and go searching for the specs on the MK-101. Thanks for the lead. Back with more when I get more specs. Best Regards, Kirk --- On Sat, 10/9/10, dennis wolfe <dwolfe@dropsheet.com> wrote:
|
__._,_.___
.
__,_._,___
No comments:
Post a Comment