Thank you for posting the info that you did! some people are just expecting everyone to be at their level!
On Wednesday, January 27, 2016 6:53 PM, "tkgc9 tkgc9@yahoo.com [electricboats]" <electricboats@yahoogroups.com> wrote:
As I am new to this type of propulsion system, I won't be able to do that yet.
I am not an electrical engineer.
My current gage only reads amps, RPM s and temperature.
I have bought some additional gages, there not installed yet.
If my information is.
" only generally accurate and therefore marginally useful"
I suggest you disregard it.
To anyone who appreciates the information, I am glad I could help.
-------- Original message --------
From: "Eric Dysart ewdysar@yahoo.com [electricboats]" <electricboats@yahoogroups.com>
Date: 1/24/2016 12:21 PM (GMT-06:00)
To: electricboats@yahoogroups.com
Subject: [Electric Boats] Re: conversion performance
Thank you for posting your measured performance.
Please use watts rather than amps when posting performance. First, posting amps means that we all have to do the math ourselves to make a reasonable comparison to our own boats. Second, if we do the math, we can only use the nominal voltage rather than your system's actual voltage when you took the reading. This means that your data is only generally accurate and therefore marginally useful.
Eric
Marina del Rey, CA
Please use watts rather than amps when posting performance. First, posting amps means that we all have to do the math ourselves to make a reasonable comparison to our own boats. Second, if we do the math, we can only use the nominal voltage rather than your system's actual voltage when you took the reading. This means that your data is only generally accurate and therefore marginally useful.
Eric
Marina del Rey, CA
__._,_.___
Posted by: Salome Fonseca <salomefonseca@yahoo.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (10) |
.
__,_._,___
No comments:
Post a Comment