The motor compartment seems unusual as the original stringers suggest the original engine was significantly further aft. Is this a new custom build? The extension seem inadequate but hard to tell form the picture. A ruler in the picture would be helpful.
My suggestions:
- contact us at Electric Yacht as we can help you with details on the motor - they are built to each boat.
- give us a view of the shaft and propeller as the shaft may have been moved to a position too far forward. Might be a new shaft and it is too long. If it the original shaft, you can also check the shaft for ware indication at the packing gland and see if the shaft was originally in a different position.
- Building extended stringers on the same plane and making them the same dimensions would be the next step if the motor must be placed in that position. Make sure that there is room between the stringers as they do seem a bit narrow but hard to tell without a ruler measurements.
You can contact us for motor detail and installation instructions through the website or by email mike@electricyacht.com
Thanks,
Mike
- give us a view of the shaft and propeller as the shaft may have been moved to a position too far forward. Might be a new shaft and it is too long. If it the original shaft, you can also check the shaft for ware indication at the packing gland and see if the shaft was originally in a different position.
- Building extended stringers on the same plane and making them the same dimensions would be the next step if the motor must be placed in that position. Make sure that there is room between the stringers as they do seem a bit narrow but hard to tell without a ruler measurements.
You can contact us for motor detail and installation instructions through the website or by email mike@electricyacht.com
Thanks,
Mike
_._,_._,_
Groups.io Links:
You receive all messages sent to this group.
View/Reply Online (#30825) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [newarmyguitar24@gmail.com]
_._,_._,_
No comments:
Post a Comment