Sent from my iPhone
I think a trolling motor while possibly not the most efficient may be your best choice. At least they're affordable. Torqueedos are probably better motors but they're priced accordingly.
I've used a 40# Minn Kota on my 18' canoe for several years now, and I've been very happy with it. It's probably a "resistor" motor as some others have mentioned and when I replace it (soon) I'm going to go with the 55# PWM motor which should be more efficient and even faster (the 40 would get me 5 mph, and 20 miles on two golf batteries).
If using a trolling motor you want to build a fairing for the round motor shaft. Without the fairing the shaft causes considerable turbulence (not to mention drag) and also vibration. The fairing also helps steering. For fishing the round shaft may not matter but at the speeds you'll be making you need the fairing.
I tried a Kipawa prop on my Minn Kota but found the performance was not as good as the original prop.
Some pix:
http://s71.photobucket.com/user/stmbtwle/media/100_0700.jpg.html
--- In electricboats@yahoogroups.com, "justaflsailor" <sbl12@...>
http://s71.photobucket.com/user/stmbtwle/media/Controldetail.jpg.html
http://s71.photobucket.com/user/stmbtwle/media/MotorInstallation.jpg.html
Willie
wrote:
>
> I was curious if anybody has done this as to not reinvent the wheel.
> The oat is 16ft almost canoe/ kayak shaped. It weighs about 140 lbs.
> I had thought about using a cut down trolling motor, but heard they were innefficient. If somebody has in their opinion the best set up, I would love to hear.
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (10) |
No comments:
Post a Comment