I have a 30' Rawson ketch, 12,000lbs, with the ThunderStruck 10kW kit about four years old. Me1616 I think and the sevcon gen4. I have 1000ah of battery at 48v. I have operated her regularly without much issue for about four years.
The sevcon unit has heat sinks on the back. I have a 600a breaker in the circuit. There is no other cooling.
Yesterday I had a problem when running at 3/4 throttle for 40 minutes or so against a tidal current - the motor whined a couple of times and cut out - I shut off the throttle and waited for 20 min and then started again at 1/4 throttle. Luckily the sailing was enough to keep me making forward progress against the current, though barely. I assume that it was overheating - I have not seen that before but I rarely push it at that rate for that long.
My question is: which component was most likely too hot - the motor or the sevcon? What strategies have worked for others for improving the cooling? Would a 12v fan or two in the engine compartment help?
It's a big compartment - used to have a 40hp diesel and even then had plenty of room. There are a couple of scoops for fresh air and I could fit a 3-4" fan inside one.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#32628): https://groups.io/g/electricboats/message/32628
Mute This Topic: https://groups.io/mt/105924296/3360820
Group Owner: electricboats+owner@groups.io
Unsubscribe: https://groups.io/g/electricboats/leave/6293187/3360820/430022002/xyzzy [newarmyguitar24@gmail.com]
-=-=-=-=-=-=-=-=-=-=-=-
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment