Yes there is a single wire to each cell. (see pic attached) Also some shots (also VID) of the EVIC (Andomeda) displays. I don't have a good shot of the wiring for the BMS at the controler, everything is pritty much plug and play though. I'll get some shots this weekend.
Steve in Solomons MD
Lagoon 410 S2E
From: electricboats@yahoogroups.com [mailto:electricboats@yahoogroups.com]
Sent: Thursday, April 13, 2017 11:39 AM
To: electricboats@yahoogroups.com
Subject: Re: [Electric Boats] Re: wire gauge
Glad to hear from someone using the Orion BMS, I am currently using another brand, that just went out of business, I am using the centralized MiniBMS, so switching to the Orion BMS should be just a swap out. Any pictures of your Orion and Andromeda setup? I never really cared for the high and low warnings being dependent on the key position on the MinIBMS any ways.
My current setup looks like this :
You can see that I fused the lines before the BMS. The Orion BMS also just needs a single line to each Cell?
On Apr 13, 2017, at 7:39 AM, 'Steve' sdolan@scannersllc.com [electricboats] <electricboats@yahoogroups.com> wrote:
Mike,
I'm using the ORION BMS with the Andromeda monitoring system and couldn't be happier. It monitors a pack of 48 LiPo's with the balancing within .02V max. It also tells me what the usage is per motor (I have 2 drives) and the % of charge. I charge to 98% at 190AH though the batteries tested at 202AH. I had Andromeda build a custom display programed for my boat and it's at the helm. Both products are fully programable and user friendly.
Steve in Solomons MD
Lagoon 410 S2E
I would also like to hear what people are doing about balancing their battery packs. Who is using an equalized to keep each individual battery equal in the string? What are your experiences?
Mike
Electric Yachts of Southern California
Attachment(s) from Steve | View attachments on the web
4 of 4 Photo(s)
1 of 1 File(s)
Posted by: "Steve" <sdolan@scannersllc.com>
Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (13) |
No comments:
Post a Comment