Hi Chris,
There's a high quality open source project (https://github.com/signalk) that possibly could be adapted for automated data acquisition. The canboat (https://github.com/canboat/canboat) developer participates in the SignalK project. So (with some effort) it should be possible to acquire Sevcon (proprietary?) CANbus data commingled with NMEA data.
I am replying to all in case there are any CANbus lurkers out there. :-)
P.S. I didn't notice any USB ports on my Sevcon 4 controller. What's the physical connection to the Sevcon controller that you use to run the Sevcon DVT application?
--Bob Moriarty
Ox 1976 C&C 33
LOA: 32.87' / 10.02m
LWL: 26.42' / 8.05m
Displacement: 9800 lbs./ 4445 kgs.
Propulsion System: Electroprop Racer
Batteries: 4 X Northstar 210 FT Blue+
LOA: 32.87' / 10.02m
LWL: 26.42' / 8.05m
Displacement: 9800 lbs./ 4445 kgs.
Propulsion System: Electroprop Racer
Batteries: 4 X Northstar 210 FT Blue+
Motor: Motenergy ME 1114 Rev A
Controller: Sevcon Gen 4 275 Amp
Current Prop: 2-blade fixed 16X10X1
(original - came w/A4)
Jax, FL USA
Current Prop: 2-blade fixed 16X10X1
(original - came w/A4)
Jax, FL USA
__._,_.___
Posted by: Bob Moriarty <moriartybob@yahoo.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (30) |
.
__,_._,___
No comments:
Post a Comment