T-Pain Is On A Boat: Re: [Electric Boats] Help with wiring diagram for LIFEPO4 BMS

Monday, July 20, 2009

Re: [Electric Boats] Help with wiring diagram for LIFEPO4 BMS

If I am reading the diagram right, You connect one line to each
positive post, and then connect the negative post to the connector
labeled (P -)
All this is parallel to the load cables. If you had a picture of the
unit and cables it might help.

On Jul 20, 2009, at 10:37 AM, Chris Witzgall wrote:

> HI All;
>
> I received the charger and BMS I ordered from ecitypower. They sent a
> diagram to me that is supposed to show me how to wire this thing up
> to my
> pack. The pack is coming from evcomponents. IT will have eight
> cells, to
> make up a 24v battery.
>
> Here is what they sent:
> http://www.witzgallphotography.com/images/bms.jpg
>
> Could somebody help me understand how I would wire this thing up in
> practical terms? The board has three holes, which I could bolt-
> through,
> shown on the diagram. It also has a plug-in pigtail, with eight
> wires. I
> also want to wire in one of these:
>
> http://www.rc-electronics-usa.com/ammeters/rv-battery-monitor.html
>
> Unless there is a better inexpensive option for monitoring the
> battery state
> of charge/dischage.
>
> Chris
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]