You're right, it's definitely not pretty.
But what the heck, Jeff. As long as you don't cut your arms when servicing it, it may be ok.
Use a grinder to round the corners, that will minimize the injuries later.
Cheers,
Carsten
On Thursday, 6 January 2022, 04:59:13 CET, jeffsschwartz@hotmail.com <jeffsschwartz@hotmail.com> wrote:
Hi Luke,
Here are some pics of my install in progress, I found it easiest to follow the same footprint as the old engine, just needed to shim up the front mounts to get the angle right. The frame is slotted so the entire unit could be adjusted in all dimensions to ensure proper shaft alignment.
It's not pretty but it's solid! Painting is in progress now.
Regards,
Jeff.
Here are some pics of my install in progress, I found it easiest to follow the same footprint as the old engine, just needed to shim up the front mounts to get the angle right. The frame is slotted so the entire unit could be adjusted in all dimensions to ensure proper shaft alignment.
It's not pretty but it's solid! Painting is in progress now.
Regards,
Jeff.
No comments:
Post a Comment