Not hard at all.
Buy a salvage tesla for the batteries, and the motor and controller as well if you have good electronics/it skills.
The famous online hackers who have done this would likely help / guide you.
I've learned a lot by lurking, but I'm contemplating a project that is MUCH larger than anything I've seen addressed here, so I thought I'd ask for advice…
Thanks in advance !
Project: 100' and 100 +/- ton canal barge repowering
Current power (broken) diesel engine from 1957, originally rated 116 hp
I'd like to yank that beast and repower with an electric drive.
Velocity requirements are: normally 3-5 knots. Panic mode 10-12 knots.
Assume the end product looks like a battery bank, 1-2kw solar, an autostart genset (possibly a larger and smaller unit?). Autostart based on demand and/or battery voltage… but that's a pretty broad assumption and I'm certainly open to options...
Generally, plan to move <20 miles per day, or maybe as far as the sun will take us. Also, typically don't have to deal with any current (but occasionally, thus panic mode above)
I thought I'd ask about feasibility before I even looked at the costing ;-)
Thoughts and/or suggestions?
Thanks!
-Rob
-- -hanermo (cnc designs)
Posted by: Hannu Venermo <gcode.fi@gmail.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (12) |
No comments:
Post a Comment