Monday, July 18, 2011

Re: [Electric Boats] Intro

 

Hi Capt. Mike,


Thanks for the input. My boat has an extended hull over the original design, with a traditional transom not suited to an outboard. Also, the aesthetics are important to me and I don't want an ugly outboard bracket hanging off the back. I could possibly have an outboard in a cockpit well, and I hear what you're saying about pods and motors running underwater, but unless I'm mistaken the Torqeedo actually uses a motor in an underwater pod relying on seals too. I am actually considering a Torqeedo, but I would prefer a more 'permanent' installation, and the option of regen under sail.

Cheers,

Mike




On 12 Jul 2011, at 11:18, Capt. Mike wrote:

 

Mike:

Sounds like a great design for EP. I do wonder why you are so interested in a retractable pod if your boats design was based on using an outboard. Seems like you might accomplish the same thing with an electric outboard like a Torqeedo. Personally I never liked the idea of a pod. I don't like the idea of an electric motor operating under water and depending of seals to keep the water out.

Capt. Mike

Sent from on board BIANKA
http://biankablog.blogspot.com

From: Sarah Shepherd <shepsinorbit@yahoo.co.uk>
Date: Mon, 11 Jul 2011 19:34:51 -0400
Subject: [Electric Boats] Intro

 

Hello Everyone,
I'm new to this forum so here's a quick hello to tell you all what I'm up to (or hope to be!) I'm planning the build of a 29 foot light displacement performance gaffer which I will be starting to build in wood-epoxy early next year. I'm an experienced sailor but very new to boatbuilding and just as new to electric drives. Since it will be used primarily as a day sailer and plugged into shore power at night, with the occasional weekend at anchor, I intend going the electric route. This also fits with the boat's environmentally friendly approach - sustainable cork will feature in the floors, spars will be bamboo/carbon composite and I hope to use environmentally friendly epoxy. Not to mention wanting to keep a smelly, oily diesel out of my clean new boat! I have been doing a lot of research on the web and am really excited about all the electric drive possibilities out there. I had no idea there were already so many manufacturers! One option I'm looking into is the pod type drive unit rather than a saildrive, such as the Podmaster from Mastervolt. I want to avoid shaft drive for reasons of simplicity and drag. I am thinking about mounting the pod on a retractable frame with a hull-shaped plate fixed underneath that will close off the aperture when the pod is retracted, similar to a retractable bow thruster in concept. The reason for this is to further reduce drag (my boat is based on another design that used a conventional outboard motor) and to keep the pod out of the water when not in use. I'd be interested to hear from anyone with any experience with these pods, or have any comments on their performance/efficiency etc versus an electric saildrive, or indeed any links or info at all that I may find useful? I'm
Thanks in advance for the help.
Kind regards,
Mike



__._,_.___
Recent Activity:
.

__,_._,___
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)