Well a little life! and thank's Dan for your input! Most I get is can't be done. Watch me! The more inputs I get , good or bad , the more knowledge-- I love it! Facts I've found in my investigation of converting a 16' Sea Ray f16 to elec--(my goal.) It's miller time , so this may be long (warning) As stated in my opening call for help and has anyone done this. 1.The Merc/force 90 and 120 hp 2 cycles are pretty bad, salt water doesn't help, can be rebuilt for $1,000 to $3000-- But how long would it last? I had thought about a MC engine--could do but the exhaust problem set me free on that. 2. EV cars now have alot of DIY people , and TELSA (wow) plus the hybrids--won' 3. OK for the displacement people ----Ever seen how quick a jet ski , or jet boat gets on plane. The DYI people are usilg Golf cart of fork lift electric motors and are very happy! 4.Ou U tube are Jet skis converted to elec--cool 5.OK the prop range on my boat is 4800 to 5300 rpm. 6. The motor at 5-7000(redline) worked it ! 7. So my Question was --Has any one attempted this, and any one know of a elec motor that will turn this rpm without going exotic to ac, 3 phase etc. Pref series dc, one way, don't need a 2 direction motor. Seems to work Great for cars. 8 Not looking to go to Bahamas. When you think about it, if you go out boating--I have to contend with Manatee zones, 5mph, Intracoastal etc . and usually go clamming or fishing, so a day may consist of little full speed in a 4-5 hr period an average. 9. FYI--suggested get a displacement hull and go slow! I have a 25' Seaward, with a 9 hp yanmar diesel--that' 10. I got the jet for getting the dog into the islands, maybe carrying a tent , STABILITY, and to go shopping for suplies while anchored out. I hate rubber boat's and a wet ass etc. (present). Try dropping a 45 pound dog into a rubber boat--better try and get the dog back into a 25' sailboat. 11. Last, amen, -- ELCO has done it for years, and the Queen Mary and alot of new jobs run on elec. with thru hull drives for direction-- SO --help me with any more inputs Thanks Dan for a positive input ! Ernie |
__._,_.___
.
__,_._,___
No comments:
Post a Comment