Dan,
William had asked where to ground to now that his ICE was history. If you follow AYBC wiring guidelines it's pretty clear the AC ground & DC negative connect to the same buss/ground. There are a couple of EP vendors that recommend this also.
I have two free floating DC systems on my boat. However my solar case ground connects to the same keel bolt that the AC & inverter case ground connects to along with the lightning bond. I figure once the solar case was grounded my DC system became defacto grounded depending on which battery bank was being charged. I have considered grounding my drop pan that the electric drive is bolted to more for lightning strike protection than anything else. Is this right approach? I don't know. I'm sure a surveyor would have a field day with most of our electric boat wiring systems.
I read somewhere there's supposed to be some new ABYC guidelines coming out soon specifically for electric boats. It'll be interesting to see what they recommend.
Bob Why would you do this for DC? You would do that for a lightning rod termination. DC does not need a ground to earth. AC needs a ground to earth. The reason you ground to the engine is because it is a massive block of metal. Completes the loop. Ground from battery to block, ground from anything else to block or battery it does not matter.DanOn Thursday, December 3, 2020, 06:51:17 PM MST, Bob Jennings <heatnh@gmail.com> wrote:Ground to a keel bolt if one is available.On Thu, Dec 3, 2020, 6:36 PM William Shannahan via groups.io <shannahanwilliam=yahoo.com@groups.io> wrote:So I removed the old diesel and am getting ready to install the electric motor. Was reviewing Don Casey's book and came across the illustration showing the whole DC System being grounded to the diesel engine block.Since that is no longer there what should I ground to?
No comments:
Post a Comment