Further to my last, here's a link to a source for a universal ebike controller that will handle up to 28A at 36V nominal: http://www.bmsbattery.com/universal/244-universal-brushless-hub-motor-controller-0123456789012.html
As you can see, the basic components are pretty cheap - the cost of these units comes from all the work needed to integrate them into a reliable product (much more costly than it seems when you try and do it!).
Jeremy
--- In electricboats@yahoogroups.com, "Jeremy" <jeremy_harris_uk@...> wrote:
>
> They are pretty standard model aircraft three phase brushless outrunner motors. Here's a web page showing a stack of them, all different powers and sizes: http://www.hobbyking.com/hobbyking/store/uh_listCategoriesAndProducts.asp?catname=All+Outrunner+Motors&idCategory=63&ParentCat=59
>
> These motors are easy to drive using a standard brushless motor controller, either one designed for use with sensorless motor electric bikes or ones like this designed for use with model aircraft motors: http://www.hobbyking.com/hobbyking/store/uh_listCategoriesAndProducts.asp?catname=All+Speed+Controllers&idCategory=61&ParentCat=182
>
> I've made a few boat propulsion systems using model aircraft motors, but I adapt them so that I can use cheap electric bike controllers, as the bike controllers have nice features like cruise control, a reversing switch and current limiting (handy if the prop fouls).
>
> If it were me, then I'd get hold of a sensorless electric bike controller, as that will mate directly to a twist grip electric bike throttle. The model aircraft speed controllers need to have a throttle kludged up from a servo tester, as they need a PPM signal to set rpm.
>
> Jeremy
>
> --- In electricboats@yahoogroups.com, "F Neil Simms" <f.neil.simms@> wrote:
> >
> > Anybody know what sort of motors are encased in the hub of the Torqeedo outboards, in particular the 801 and the 1003? In one of their product photos, they show the motor with 3 wires - see the last image in this ebay listing:
> >
> > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=400212859924
> >
> > Any chance you could bypass most of the Torqeedo electronics and instead connect your own controller to the motor, thereby gaining total control over power source, power applied, etc.?
> >
>
No comments:
Post a Comment