Hey Tom,
I am running a 14 inch 13 pitch 3 blade prop inside a Rice Power/Speed nozzle, this gives me the most effecient use, my friend with the 50 hp diesel is running a 13 inch 8 pitch open 3 blade prop........
First I would never hook the 2 boats stern to stern for a pulloff, that to me is just BS. Both tests were made with the same 550 lb. pull scale. At 3000 rpm's he had slightly more pull than my electric but he never runs his diesel at that rpm. At 100 amps I was reading just a little over 300 lb pull. At the 3000 rpm's diesel he was about 20 lbs pull over the electric..
That's the no BS account..... believe it or not is your choice...
Dave K (my real name)
-- On Wed, 5/27/09, iloveamercedes@
From: iloveamercedes@
Subject: [Electric Boats] RE: Electric power for over 30' [Question for Dave K]
To: electricboats@
Date: Wednesday, May 27, 2009, 3:38 PM
Hey Dave, I am intrigued at the prospect that a rated 8 hp electric motor
can have the same pulling power as a 'rated' 50 hp Diesel motor!
Now I may not understand what "Bollard Pull" is... but I do understand
that there are a few things people s-t-r-e-t-c-
is about Gas Mileage and evidently the other one is the power electric
motors produce. lol. Ok Dave, I'm only kidding but please help me to understand
how this can happen? I mean 'Efficiency' can only do so much!
Is this '300 lb Bollard pull' at startup, full speed or someplace in
between and if this is true, why am I looking at a bigger motor? A 300 pound
pull is a lot of pull/push...
So let me recap:
If you took a 20' line and hooked your sailboat (8 hp) to your friends
sailboat (50 hp) Stern to Stern and you both opened throttle; Nothing would
move until either you ran out of electricity or your friends sailboat ran
out of Diesel.
-Tom- (not my real name)
In a message dated 5/27/2009 11:08:35 A.M. Eastern Daylight Time,
inganear1@yahoo.
Tom, there are several projects completed and many underway in
approximately your size range. 48 volt systems seem to be the normal voltage for most
but some run on 36 volts. Look through the photo section, you'll find
several to draw ideas from. There are several guys one the site that are
building a business out of electric conversions making kits/pods and other
things that may be of interest to you. My boat is a 30 ft ChrisCraft Capri
sailboat that weighs in at 12000 lbs. I use a Etek brushed motor 8 hp and
have the same bollard pull as a friend of mine on his 50 hp diesel, (a
little over 300lbs), so you see it's not just rated Hp that does the job, it's
also efficiency..
Dave K
--- On Tue, 5/26/09, Tom <_iloveamercedes@
(mailto:iloveamercedes@
From: Tom <_iloveamercedes@
Subject: [Electric Boats] RE: Electric power for over 30'
To: _electricboats@
Date: Tuesday, May 26, 2009, 8:15 PM
Hello everyone!
I know there must be a thread for powering sailboats over 30' with
electric motors. Can someone direct me to it?
My sailboat is a Cal 35 Cruising. She is of 15,000 lbs. Displacement.
I think this project would need around 35 hp. She has a 4-108 Perkins of
'Claimed' 50HP hahahaha!
Anyway, with what little I know about this, I would need a bank of about 5
Golf Cart Batteries.
I also want to utilize Solar Panels as well as a Gas Power Generator.
So let me know how screwed up my ideas are so I can get an idea of where
to start here.
Thanks
------------
Yahoo! Groups Links
[Non-text portions of this message have been removed]
************
Family. Sign Up Now!
(http://pr.atwola.
3Fhttp:%2F%2Frecipe
[Non-text portions of this message have been removed]
------------
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
No comments:
Post a Comment