----- Original Message -----From: acsarfkramSent: Tuesday, February 08, 2011 9:39 PMSubject: [Electric Boats] Re: Turnigy Watt MeterI finished the Turnigy Watt Meter modification today. It works great so far. now I have amp draw, voltage, watts and some other information at the helm. It mounts next to the compass and is held in place with a nylon wedge and Velcro. When not in use it is covered under the compass cover. I'll add some photos to the Lotus Flower folder.
Turnigy Watt Meter $30, Bogart shunt $30, misc. wiring and connectors $40, time scratching head - priceless.
Mark
Santa Cruz
--- In electricboats@yahoogroups.com, "acsarfkram" <acsarfkram@...> wrote:
>
> I stumbled on this inexpensive watt meter;
>
> http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10080
>
> and ended up at this E Propulsion website;
>
> http://endless-sphere.com/forums/viewtopic.php?f=2&t=21976
>
> while researching installing it at the helm. The issue is that the shunt is mounted inside the unit so you have the mount it near the batteries or run heavy wire to the helm. I ended up ordering a shunt;
>
> http://www.bogartengineering.com/sites/default/files/images/high-res/100A-100mV_shunt.jpg
>
> and plan to locate that near the batteries and running small gauge wire to the helm. I know I could spend more and have a more robust setup but this gives me the tinkering fix that I have been missing lately :-)
>
> Mark
> Santa Cruz
>
No comments:
Post a Comment